June 9, 2014 - 6:25am
![Bob Marley's picture Bob Marley's picture](https://www.thefreshloaf.com/sites/all/themes/thefreshloaf/images/default_user.jpg)
Percent Levain in Dough
Another clarification is needed. When someone states for example "40% levain", does that mean:
- 40% of the final dough's weight?
- 40% of the added flour's weight (excluding the flour contained in the levain)??
I have seen it referred to both ways, so it can be a bit confusing. Generally in recipes it seems like people refer to it as a part of percentage of the total dough weight, but on this very interesting thread at pizzamaking.com: http://www.pizzamaking.com/forum/index.php?topic=22649.0 they have a predictive model chart for starter in dough that uses the amount of starter as a percentage of the total flour in the recipe.
if it is baker's percentage it is in relation to total flour weight. So 40% levain would be around 20% pre feremnted flour (+/- pending levain hydration) which is pretty common.
Josh
I would say 40% of the total Flour weight that the recipe calls for.
Common practice is to use Baker's percentage. 40% means that 40% of the total flour used is contained in the Levain.
Wild-Yeast
Comparing the chart found here: http://www.pizzamaking.com/forum/index.php?topic=22649.0
and the manufacturing process for San Francisco sourdough (the "other" process) posted here http://www.thefreshloaf.com/node/17730/divine-inspirationfor-me-it-way-larraburu-brother039s-sf-sd-what-was-it-you by doc_dough on 7/18/2011 we see the following:
"Other" bakery
Percent starter/sponge = 20%
Proofing temperature = 86 F
Proofing time = 8 hours
Model:
Percent starter/sponge = 20%
Proofing temperature = 86 F
Proofing time = 7 hours
As my high-school physics teacher used to say, "my, how close!"
Percent starter/sponge = 20%
20% of WHAT??? 20% of the unused flour to be added later on??????????????????
20% of the final weight of the completed dough????????????
The way I interpret that paper is, they treat the sponge as a separate ingredient (they give the recipe for the sponge). Once made up, the amount of sponge used in the dough is 20% of the flour weight of the dough, i.e. 100 g flour and 20 g of the finished sponge.
In calculating baker's percentages you never use the final dough weight in the calculations. The final dough weight would include the weight of the flour, water, salt, other ingredients (sugar,), etc.. You wouldn't use sugar in sourdough but you would in a cake recipe. All of the ingredients are based on the flour weight which is normalized to 100.
In a bakery using 100 lbs. of flour (two 50-pound sacks), the "other" sourdough recipe would use 20 pounds of finished sponge, 60 pounds of water (about 7 gallons) and 2 pounds of salt. It adds up when baking on a large scale.
The percentages used in baker's percentage are the percent of the flour weight, which is always 100%.
THANK YOU and that's what I wanted to hear. Here's an example of my math:
500g flour (excluding flour contained in the levain). Therefore...
200g levain (this is the 40% levain at 100% hydration)
350g water (this is the 70% hydration based on the wt of flour listed above)
------------------------
1050g dough
==============
The dough, therefore consists of:
600g flour TOTAL
450g water TOTAL and so this represents 75% hydration instead of 70% as shown above. The calculation of hydration is the source of my confusion:
1) HYDRATION that is based on ADDED FLOUR exclusive of the flour in the levain;
2) HYDRATION that is based on the GRAND TOTAL OF FLOUR in the dough: that is, the flour in the levain + added flour.
I do, indeed, hope that I've clarified this math and my confusion. Upper case added for emphasis and clarity. 8)
I find this confusing as well. 20% of either flour or total dough weight is definitely a significant enough quantity to change the hydration level in the recipe, unless of course one is careful to build the levain at the same hydration percentage one desires in the finished dough.
You 've got two definitions for the same thing. #2 is the one to use. The equation you're looking for is:
percent hydration = ( (water in recipe + starter water) / (flour in recipe + starter flour) ) * 100
Using your numbers:
Flour in recipe = 500 g
Starter flour = 100 g
Water in recipe = 350 g
Starter water = 100 g
hydration = (350 + 100) / (500 + 100)
= (450 / 600) * 100
= 75% hydration
Right you are! Note that total dough weight is not used in the equation. It is the ratio of water to flour.
When I forumlate a bread from scratch, I calculate what percentage of total flour weight should be in the preferment, for sourdough I keep it between 10-20% depending on how quickly I want the dough to rise, if I'm going to be bulk fermenting, and how sour I want the final bread. From that percentage, I figure out how much starter to use, depending on the hydration of the starter. Examples for 500g total flour:
70% hydration dough, 10% flour prefermented, 100% hydration starter
100g starter (100% hydration)
450g flour
350g water
10g
70% hydration dough, 20% flour prefermented, 100% hydration starter
200g starter (100% hydration)
400g flour
300g water
10g
Both of these breads have the same basic formula, but with a different percentage of pre-fermented flour. The confusion comes in when you say "40% starter" if we are talking bakers percentage, that works out to a totally different number using different methods.
Bakers percentage for "40% starter" given 500g flour added after starter. (also counting starter being 100% hydration):
500g flour (100)
200g starter (40)
350g water (70)
10g salt (2)
The problem I have with this method, is that it does not count the water in the starter into the hydration %, nor the flour for calculating salt% So on the face of it the bread looks balanced, however if you crunch the numbers on that last bread, you get this:
hydration: 75%
salt: 1.6%
prefermented flour: 16.6% total flour weight
The hydration percentages and salt percentages aren't completely visible right away, and a 75% hydration dough behaves much differently than a 70% hydration dough, like one might be expecting when reading the above formula, the salt content is also a bit low. This descrepancy is the main beef i have with the Dan Leader book "Local Breads," as he does not count the starter in his hydration calculation (Chad Robertson is guilty of this as well). This may seem easy to remedy with a 100% hydration starter, but it becomes much more difficult if you have a 50% 60% or 130% starter, like are called for in the Leader book.
Soooo the "to long didn't read" version: I think it's better to calculate the raw bread formula first, with the total flour/water/salt/enrichments, find the amount of pre-fermented flour you want, then subtract thoes amounts from your raw formula.
I am currently undergoing training to be a Bread Baker's Guild of America (BBGA) formula formatter, so forgive me for being a bit - um - "rigid."
Please go to www.bbga.org and you will find (in the public area) standards for writing formulas.
In this thread, mixinator (method 2) and baybakin (showing us the "right way") come closest to the BBGA standards.
We seem to have these same discussions over and over. Although "rigid" the BBGA standard is simple, straightforward and works every time for every formula you can imagine. I know that knuckling under and using a standard method may take the fun out of the process for some folks, but weighed against the flexibility and understanding that a standard method brings - well, the standard makes things so much better. One question I have often seen posted is :How do I convert from commercial yeast to sourdough? can have a complex answer, but using the BBGA standard is a trivial problem.
I get distracted when authors use other standards, but even then, you should be able to take their base formulas and convert them. "40% starter" tells me nothing by itself, but with additional information can be made to fit the standard.
It is well worth even the home baker's time to learn this method. Once learned, instead of being restrictive, the BBGA standard is actually quite freeing.
I'm going to end this sermon - but really, the BBGA website is worth a look.
I plan to follow the layout and process as indicated in those charts. They clarify things better than I could.
The one comment I'll make applies to PART II DIAGRAM 1. The individual weight of flour and water contained by the "seed" do not figure into flour and water totals for Final Dough; and, do not figure into the flour and water totals for the Total Dough Weight.
In essence, the actual breakdown of the flour and water seed is not done. The seed is considered a unit unto itself and its actual flour and water contribution is negligible, shall we say.
elsewhere, the discounting of the amount of flour and water in the seed is a simplifying assumption, and yes, as you say, because it is usually a small amount in relation to the dough and since the process of bread making itself has plenty of variation, one that causes no harm.
Because I like to do algebra, I actually did make up a spreadsheet that took the hydration of the seed into account. Interesting mathematically, but for baking, not really worth it.
Yes, thank you for the link - lots of great info there!
I agree with Bob Marley, though, about the example in Part II, Diagram 1 - they didn't go the extra step and break out the composition of the seed. It's a small amount in terms of the finished recipe, of course, but it's a large enough amount to change the hydration of the preferment quite a bit. If the seed in that example is at 100% hydration, the final preferment hydration will be 58.1%. However, if the seed is at 50% hydration, the final preferment will be 55.5% hydration - not a huge difference, but enough that you might want to account for it in your formulation.
my comment above...
Note also, the small amount of seed usually used. The seed is taken from a storage starter to create the pre ferment.
These standards were developed with the input of a number of respected professional bakers and are, indeed,evolving, but they are intended for practical applications, not particularly for mathematical interest.
Since we start with the overall formula and determine the hydration there, the control is in the final dough. In the final mix the baker will still add water if he/she thinks the dough needs it thereby changing the actual hydration from the theoretical hydration in the formula.
Same with the pre ferment. If, when it is mixed, it "seems" too dry, the baker will add more water regardless of what the formula tells her/him.
There are two factors - the mathematical interest and the very variable process due to variable ingredients, and frankly, the dough being a living creature. You don't over calculate when the process doesn't support it (and we have been presented with this in the context of our training. It's engineering vs. pure science.)
Hope this helps.
As noted by my inquiry and the responses, bread baking can involve some ambiguities to be neglected. >8^0
Absolutely - makes perfect sense. It just seems like for hypothetical teaching purposes, it's best to be as mathematically precise as possible to avoid this sort of question.
the interesting things about TFL is the high number of folks (like myself) who come from the "high burnout" professions like software and various branches of engineering. We've got that mathematical precision drive and the math background that makes some of these calculations sort of trivial.
Although I have met professional bakers with great math skills, the majority of them have their primary talents in other areas and instead of loading on theory, the math is kept to what is useful. I have personally wilted a bit when methods for scaling formulas up and down have been discussed, since what is done through various "factors" seems more straightforward with a little algebra. I like algebra, but a lot of people don't really get it. So when we say to bakers - even when teaching this to them - "we do not need to account for the hydration of the seed," we get nods of comprehension and (sometimes) gratitude.
If I were teaching this to a room full of engineers, I would have in my back pocket a spreadsheet that would show how theoretically the hydration of the seed impacts the entire process. I do have that spreadsheet, and I abandoned it because it really wasn't more useful than the standard.
I'm not trying to pile on, but as welcoming as the BBGA is to home bakers, it is primarily geared for the professional baker. I am currently working on a translating a formula from what would seem to most people to be a pretty complete recipe into BBGA format. Frankly its challenging enough - even with my Excel skills, engineering degree, and years of complex software validation - that I'm kind of grateful for any simplification I can get.
Sorry to go on and on, but I am immersed in this right now. It is harder to write a formula for publication than one might think.
Peace.
Me with several degrees, French, Computer Science + 3 1/2 years Chemistry, Chiropractic, I KNOW all about burnout and logic. But the spread sheet really makes sense to me.
because on this thread we've spoken about standards and attention to detail.
I just finished formatting a formula (in the BBGA format) for a simple bread with a pre ferment and a soaker. It started with a recipe as most bakers would dash them off.
I was thinking "How hard can this be?"
Well, after 4 hours, I managed to get it formatted along with all the assumptions I had to make to put it in that format. It was non-trivial.
I am gaining a lot of respect for people who write books (if they are well written, that is). The format (not just the spreadsheet of percentages) is a very good tool to make the baker think about what he/she really did.
And I thought testing software was detail oriented...
Happy Baking!
Pat
Very interesting - I appreciate you taking the time to share!
Delete
Thanks, proth, for sharing. Interesting to know there's a standard we should adhere to.
I will read that page shortly. For this discussion I kept things simple and didn't take into account other dry ingredients. I kept it to flour and water in the context of calculating hydration.
I have read the thread (and others) but I am still confused. Maybe my english isn't good enough.
How do you calculate the pre-ferment used. I have sheet with calculation and don't know if it is correct:
Say I want to use 500g of flour 70% hydration and with 20% preferment. According to my calculations I will use:
400g flour + 250g water + 200g pre-ferment (100% hydration). that is 400+200/2 = 500g flour and 250+100/2 = 300 water.
Is this correct or not? Could someone help?
So if you see a formula like this...
Flour 100%
Water 70%
Salt 2%
Starter 20%
You will punch in the numbers like so...
Flour 500g
Water 350g
Salt 10g
Starter 100g
Final hydration will not be 70% as your starter is 100% hydration.
Now here is where some people do it differently...
Some recipes will have two formulas. They will show bakers percentages in total flour, water and salt. Then they'll re-arrange the formula to include the starter taken from the flour and water. So there are atleast a couple of ways when using bakers' percentages too.
You can have:
Flour: 100%
Water 75%
Salt 1.67%
Re-Written as...
Flour 600g
Water 450g
Salt 10g
Then re-written after taking a percentage of the flour and water to make the pre-ferment (which is the starter in the formula) to our original recipe:
Flour 100% (500g)
Water 70% (350g)
Salt 2% (10g)
Starter 20% (100g)
ooop.. mistake water is 250+200/2 = 350g. that is 70%hydration
That is now correct.
Edit: One thing to consider is that the % of flour that comes from the pre-ferment/starter is more important than the % total starter that goes in. The rest is water. You of course need this for the hydration calculation like you performed. The reason I mention this is that sometimes people use different hydration starters. So if you match the flour and adjust the water accordingly, you will have as similar a bread as you can get while using different starters. This can be a bit confusing, so it isn't really that important. I just thought I would mention it.
so Lechem's approach above is wrong? Because he says 20% preferment = 100g (20% * 500g flour)
No. You made the adjustment for the starter so that it would remain 70% hydration. He was saying that if you punch in the numbers and just add 20% starter to the 500g of flour, you will not be at 70%. He is correct.
Edit: Like he said, there are two ways to approach it. It really depends on if you want 500g total flour or if you are looking at a formula that says use 500g flour=100% then later says starter=20%. In this case, you will end up with 600g of flour total and your hydration will change.
Edit to clarify: If you want to keep the total hydration at 70%, then you do it your way (which is the same as his second way, but using different numbers). The two approaches really depend on what hydration you want to work with. If you are using a book, then most likely even though the water says 70%, the final dough will not be 70% hydration. Just like Lechem said for the first part. Again, it depends on what hydration you want.
I prefer a formula which calculates starter as percentage to the flour. Easier to calculate the proportion of everything but more difficult if you're starting with the final weight of the dough and rearranging to include a starter.
If I want the hydration to remain 70% I sometimes just build a starter to 70%.
I like when it states the starter as percentage like you say (as long as they give hydration of the starter and don't just say "firm" or "liquid"), but then mentions the hydration of the final dough so you know what to expect. It doesn't have to give the formula to show the final hydration, just a line that mentions it.
Take the 1-2-3 formula... 1 part starter (at 100% hydration), 2 parts water, 3 parts flour. The 3 parts flour doesn't take into account the flour from the starter. If it did, then this simple formula would be more complex. Also, it would show the water as 66.7% of the flour. This is all perfect, but a footnote that says the final hydration is 71.4% helps so you know you will have a fairly wet dough:
1-2-3 Sourdough
(Final hydration 71.4%)
Flour =100%
Water = 66.7%
Starter (@100% hydration) = 33.3%
Yeah, building the starter to 70% is a good approach. Then you only have to worry about final dough weight.
I do like working with them. My breads turn out really well and they're good for weaker flours.
See this thread here http://www.thefreshloaf.com/node/49698/does-anyone-use-bakers-percentages and Yozzause's post (which i'll copy and paste here)...
Just learned this today and its a nifty way to accurately to calculate a doughs weight, up or down, using baker's percentages without trial and error.
And starter is flour plus water.
Some people calculate % starter and some people calculate % flour in the starter.
Where some might disagree is purely terminology. preferment and starter can be interchangeable and it is the flour which is pre fermented.
Right. If the formula says 20% pre-ferment, or 20% starter/levain, then it means the flour+water. If it says 20% pre-ferment flour, then you only take the flour into account and adjust according to the hydration of the pre-ferment being used (which can be liquid starter, firm starter, poolish, biga, etc).
Hello, according to my questions, answers and readings I made a simple personal app for calculations. I would like to share it here, so if anybody has the time or will to test if the calculation are correct for sourdough.
http://bakery.laboratorium.gr/
thanks
But I'm just typing in %'s manually and nothing else is happening.
When it comes to fermenting times I'm no expert so can't advise you either way. I know how my starter reacts (all starters will have variables) and depending on how much I'm using I've generally learned a rough idea of how much time it'll take and everything else I play a bit by ear. For exact times according to temperature (I can't regulate a perfect temperature for my dough so that is why I have to go by feel) I can't advise.
There are 2 temperatures I work by... Cold (winter), Warm (Spring, Autumn, Summer). I live in the UK
hmm... it works in modern browsers. tested in chrome, edge, firefox. The only % you cannot change is for flour. All the others can change, and all quantities are updated. Doesn't it work on you?
my work computer is ancient. I'll try on my phone...
So just for the formula part...
1. the salt is rounded up. I changed the flour to 500g and it gave the salt as 8g for 1.5%. Haven't toggled anything else to see if it also happens with other ingredients but I imagine it would. Perhaps you need more decimal points in the formula so it doesn't automatically round it up/down etc.
2. The water percentage is correct but I think and extra box for final hydration including the starter might be a good idea. Perhaps even better would be one wouldn't need to fill in both water and final hydration. One should be able to fill in either and it should calculate the other. Sometimes the final hydration isn't important if the % of starter is low (i.e. it doesn't throw it off too much) and other times it is important if someone wants to know what they'll be handling if it's a wet or dry dough.
3. Perhaps the calculator should take into account (now this fits in with point 2) the hydration of your starter. And call the option box "starter" and not "sourdough".
4. You might wish to have an option for different flours and preferred hydration (this is very specialist so just an idea and not as important as the others).
Hope this helps.
At first I wanted to see if calculations are correct.
As for 1) yes I round the result.
But why would you need such a precision? Would it make a big difference if you put 8g salt or 7.5g? The same argument would go for hydration. Is there really a difference between a 66% hydration bread then 67% or even 68%?
Anyway I changed it a little bit to have 1 point precision, and show total hydration
For 4) I would like to expand the app to have receipts with different hydration, etc, but this would be a project for later.
If I would like to add something now would be to code the chart in the image below. So you could enter your temperature and preferred fermentation times, so as to give you a hint for the % starter.
thanks for the help!
Well hydration would be very important to know for the final dough. If you just have water and don't take into account the hydration of the starter and the starter is high percentage then your hydration would be off by quite a bit. The original formula wasn't wrong as you did name it "water" and not "hydration". If someone wants a specific hydration for an all bread flour dough then it might help to work it out depending on the hydration and percentage of the starter. So it wasn't wrong per se, I just thought it might be a nice idea to have an option of working it out.
I like what you've done with the Starter column. Looks better and you've stated it's 100% hydration.
Salt? Well the precision was more important for starter hydration, % and final hydration but as a calculator if you're making that more precise then why not do the salt?
Now have this as an APP and you're on :)