bwraith's blog

I thought it would be interesting to compare four different approaches to sourdough fermentation. I've baked four test loaves, each with 500 grams total flour (using a 50/50 blend of Heartland Mill Strong Bread Flour and Heartland Mill Golden Buffalo for a blended ash content around .85%), 72% overall hydration, and 2% salt. All loaves started with 18 grams 80% hydration white flour storage starter.

In order to fine tune my milling and sifting process, I ran a series of tests at different mill coarseness settings to see which setting might result in the best separation of bran from endosperm. I then ran a successive reduction multi-pass milling and sifting process at what appeared to be the best first pass settings and sent samples of all these tests to CII Labs to see what some of the ash content, protein content, and dough rheology might be.

As I conducted my home ash content tests during the latest home milling and sifting session, a sourdough starter was accidentally started. The home ash content test involves mixing 5 grams of flour with 100 grams of distilled water, stirring it periodically, and measuring the conductivity of the water until it stabilizes, about 24 hours later. All of that time was spent at about 69F, the temperature of my kitchen in the winter. I noticed a familiar smell, something like yogurt, that was reminiscent of the early stages of some of the starter staring experiments I have conducted in the past.

Below is a photo of my third attempt at home milling and sifting, which resulted in a flour very similar to my favorite "high extraction flour", Heartland Mills Golden Buffalo flour. The processes used on my second and third tries are explained further below. Additional photos of the process have been posted.

My home sifting project resulted in "middlings", a term I may be using incorrectly. What I mean by middlings is the stuff I sifted out that is finer than bran but was coarser and darker than I wanted for the flour being produced.

Recently, I've been attempting to grind and sift my own flour. The grinding is straightforward with a Retsel Mil-Rite, an excellent home stone buhr mill or my new Meadows 8-inch stone mill. However, the mysteries of sifting the flour have been less straightforward. A subsequent blog entry will deal with my progress on grinding and sifting my own flour. The sifting project motivates the need for measuring the ash content of my flour.

Ash Content

I've had a number of discussions with TFL participants recently about sourdough rise times versus temperature and inoculation. Temperature has a big effect on sourdough rise times, and sometimes a starter appears unhealthy, when it is really just rising more slowly because of low temperatures in the kitchen during winter. Also, recipes that used to work seem to fail during the winter, but the colder temperatures may be the cause.